7.9MM Series 5511 Carbide Drill 5xD
Brand: Guhring, Metric: 7.90 mm, Decimal: 0.3110", Flute Length: 53.00 mm, OAL: 91.00 mm, Point Angle: 140, Series: 5511, Material: Carbide, Finish: Firex
Item #: GUH 9055110079000
Guhring Series 5511 RT 100 U High Penetration Carbide Drills
5xD - Coolant Through - FIREX® Coated
The RT100 U style drill is a 2 flute, high penetration rate carbide drill designed to decrease cycle times and increase part quality. The point and flute geometry where developed to create a short, manageable chip form that can be easily evacuated from the hole. The RT100 U style drill has a self-centering point design that eliminates the need for preliminary spot drill operations. The wide-open flute design and short chip formation ability eliminates the need for peck drilling. The RT100 U drill can operate 3 to 5 times the penetration rate in inches per minute of a general purpose carbide drill thus reducing cycle time and decreasing manufacturing costs. Application Materials: General Steels/Brass, Universal Steels, Stainless Steels, Hardened Materials, Cast Iron, Ti & Ni Alloys
5xD - Coolant Through - FIREX® Coated
- Self-centering 140° SU point
- Reinforced straight shank, RH helix, RH cut
- Optimized cutting edge geometry
- Special web thinning
- nanoFIRE coating
The RT100 U style drill is a 2 flute, high penetration rate carbide drill designed to decrease cycle times and increase part quality. The point and flute geometry where developed to create a short, manageable chip form that can be easily evacuated from the hole. The RT100 U style drill has a self-centering point design that eliminates the need for preliminary spot drill operations. The wide-open flute design and short chip formation ability eliminates the need for peck drilling. The RT100 U drill can operate 3 to 5 times the penetration rate in inches per minute of a general purpose carbide drill thus reducing cycle time and decreasing manufacturing costs. Application Materials: General Steels/Brass, Universal Steels, Stainless Steels, Hardened Materials, Cast Iron, Ti & Ni Alloys
Item Specifications
-
Guhring
-
0.3110"
-
53.00 mm
-
Carbide
-
7.90 mm
-
91.00 mm
-
140
-
5511
-
8.00 mm
-
Firex
-
Coolant Through