9.60 mm Carbide High Penetration Drill
Brand: Guhring, Metric: 9.60 mm, Decimal: 0.3780", Flute Length: 47.00 mm, OAL: 89.00 mm, Point Angle: 140, Series: 5610, Material: Carbide, Finish: Firex
Item #: GUH 9056100096000
Guhring Series 5610 RT 100 U High Penetration Carbide Drills
3xD - Coolant Through - FIREX® Coated
The RT100 U style drill is a 2 flute, high penetration rate carbide drill designed to decrease cycle times and increase part quality. The point and flute geometry where developed to create a short, manageable chip form that can be easily evacuated from the hole. The RT100 U style drill has a self-centering point design that eliminates the need for preliminary spot drill operations. The wide-open flute design and short chip formation ability eliminates the need for peck drilling. The RT100 U drill can operate 3 to 5 times the penetration rate in inches per minute of a general purpose carbide drill thus reducing cycle time and decreasing manufacturing costs. Application Materials: General Steels/Brass, Universal Steels, Stainless Steels, Hardened Materials, Cast Iron, Ti & Ni Alloys
3xD - Coolant Through - FIREX® Coated
- Self-centering 140° SU point
- Reinforced straight shank w/Flat, RH helix, RH cut
- Optimized cutting edge geometry
- Special web thinning
- nanoFIRE coating
The RT100 U style drill is a 2 flute, high penetration rate carbide drill designed to decrease cycle times and increase part quality. The point and flute geometry where developed to create a short, manageable chip form that can be easily evacuated from the hole. The RT100 U style drill has a self-centering point design that eliminates the need for preliminary spot drill operations. The wide-open flute design and short chip formation ability eliminates the need for peck drilling. The RT100 U drill can operate 3 to 5 times the penetration rate in inches per minute of a general purpose carbide drill thus reducing cycle time and decreasing manufacturing costs. Application Materials: General Steels/Brass, Universal Steels, Stainless Steels, Hardened Materials, Cast Iron, Ti & Ni Alloys
Item Specifications
-
Guhring
-
0.3780"
-
47.00 mm
-
Carbide
-
9.60 mm
-
89.00 mm
-
140
-
5610
-
10.00 mm
-
Firex
-
Coolant Through