19/64 Carbide Tip Hard Steel Die Drill
Brand: Hannibal Carbide, Fractional: 19/64", Decimal: 0.2969", Flute Length: 2-1/4", OAL: 4-1/4", Point Angle: 118, Series: 672, Material: Carbide Tipped
Item #: HANN 67219
Hannibal Hard Steel Die Drills Carbide Tipped Series 672
Positive Angle Cutting Edge - 118° Point
For drilling hardened steel in the range of 35 to 65 Rockwell C. Will cut without annealing the workpiece
Light feed with steady pressure - clear chips frequently.
Flood the cutting point with coolant.
Positive Angle Cutting Edge - 118° Point
- Die drill - positive angle cutting edge
- Thinned web which permits higher feed rates with less spindle power
- Drill body diameter smaller than tool diameter to prevent gauling
- Carbide tip high temperature brazed to hardened tool steel body
- Smooth flutes for effective chip flow
- Precision ground to insure concentricity of tip & body
For drilling hardened steel in the range of 35 to 65 Rockwell C. Will cut without annealing the workpiece
Light feed with steady pressure - clear chips frequently.
Flood the cutting point with coolant.
Item Specifications
-
Hannibal Carbide
-
0.2969"
-
2-1/4"
-
19/64"
-
Carbide Tipped
-
4-1/4"
-
118
-
672
-
Straight Flute