FR1050040T2R01 0.4134" 3xD Carbide Drill
Brand: Ingersoll, Metric: 10.50 mm, Decimal: 0.4134", Flute Length: 40.00 mm, OAL: 102.00 mm, Point Angle: 140, Series: FR, Material: Carbide, Finish: TiAlN
Item #: INGC 6308954
SolidDrill3 Carbide Coolant Hole Drills
3 Flutes!
Each 3-flute drill is designed with a need to balance core strength with flute depth, both of which are equally important with respect to high feed capability and optimum chip evacuation. Three coolant outlet holes
increase the amount of coolant to the end of the drill and help to “push” the chips out of the drill body, even in vertical applications.
3 Flutes!
- 3-flute geometry increases productivity by at least 50%
- Self-centering geometry provides precise and accurate holes
- Very high stability in the cut due to its specially designed edge geometry
- Reinforced cutting edge
- 3 coolant outlet holes to maximum flow and evacuate chips
- New PVD-coated grade IN2205, blue in color for easy identification
- Suitable for steel and cast iron drilling
Each 3-flute drill is designed with a need to balance core strength with flute depth, both of which are equally important with respect to high feed capability and optimum chip evacuation. Three coolant outlet holes
increase the amount of coolant to the end of the drill and help to “push” the chips out of the drill body, even in vertical applications.
Item Specifications
-
Ingersoll
-
0.4134"
-
40.00 mm
-
Carbide
-
10.50 mm
-
102.00 mm
-
140
-
FR
-
12 mm
-
TiAlN
-
Coolant Through